Farmington Roof Pros provides professional flat & low-slope roofing in Farmington, NM for residential and commercial properties across the San Juan Basin. Low-slope decks in this county are equipment platforms first and roofs second. Package units, condensers, exhaust fans, gas piping, antennae and cooler stands all live up there, and every one of them is either a hole in the membrane or a foot standing on it.
That reorders the whole inspection. On a TPO or modified bitumen roof in Farmington the field membrane routinely outlasts the curbs and pitch pans by a decade, because the field just sits there in the sun while the details get walked on, vibrated, drilled into and re-drilled every time a mechanical contractor pays a visit. Gas line supports are the worst of it, because they get moved and re-set without anyone flashing them again.
Drainage is the other half of it. Eight inches a year sounds like nothing until a monsoon cell drops most of an inch in forty minutes onto a dead-flat deck with two drains and no overflow. Ponded water is not itself a leak, but it holds grit, accelerates seam stress, and turns a small opening into a real one. Adding overflow scuppers is often the cheapest single improvement available on an older commercial deck.
So we survey the equipment field, photograph every curb and pan, and price them as their own schedule separate from the membrane. Owners can then fix the eleven details that are actually failing for a fraction of a re-cover, and push the re-cover out two or three budget years with their eyes open. That schedule also gives a building owner something concrete to take to a board or a lender.
For the systems themselves: heat-welded TPO where reflectivity and seam strength matter, two-ply SBS-modified bitumen where the deck takes constant traffic and needs a tougher surface, and silicone restoration where the membrane still tests sound but the surface has chalked and the seams hold. Insulation thickness and tapered layout get specified at the same time, since drainage is usually the real problem.
Where we will not put a coating is over a wet insulation layer or a deck with an unresolved penetration leak. A coating over trapped moisture buys nothing and hides the evidence. Core cuts first, dry it out or tear it out, then coat. That order is not negotiable and it is why our coatings last. Core cut locations are photographed and patched properly, not left for the next contractor to find.
Our licensed and insured team brings the right materials and equipment to every job — high-temperature self-adhered underlayment, lead-flanged pipe boot collars, soldered pan flashing under a cooler stand, counter-flashing let into a masonry reglet, SBS-modified bitumen cap sheet, heat-welded TPO seams — and backs the work with a written workmanship warranty. We serve Farmington and nearby communities including Aztec, Bloomfield, Shiprock, Crouch Mesa.
What We Handle
Everything our flat & low-slope roofing in Farmington covers
One crew, one point of contact, and the full range of flat & low-slope roofing work in Farmington, NM. If it is on this list we do it in house rather than handing it to a subcontractor:
- flat roof repair Farmington
- low slope roof NM
- TPO membrane install
- modified bitumen roof
- pitch pan replacement
- roof drain and scupper
- ponding water low slope
- curb flashing rebuild
- roof moisture survey core cut
- low slope re-cover
- equipment curb roofing
- single ply seam repair
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Farmington services.
Materials, equipment and how we do flat & low-slope roofing
The difference between flat & low-slope roofing that lasts and flat & low-slope roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with high-temperature self-adhered underlayment, lead-flanged pipe boot collars, soldered pan flashing under a cooler stand, counter-flashing let into a masonry reglet, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Farmington job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the San Juan Basin means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do flat & low-slope roofing outside Farmington
Farmington Roof Pros covers Farmington and the surrounding communities of the San Juan Basin. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Flat & Low-Slope Roofing in Aztec, NM — San Juan County, population 6,201
- Flat & Low-Slope Roofing in Bloomfield, NM — San Juan County, population 7,421
- Flat & Low-Slope Roofing in Shiprock, NM — San Juan County, population 7,718
- Flat & Low-Slope Roofing in Crouch Mesa, NM — San Juan County, population 5,257
- Flat & Low-Slope Roofing in Lee Acres, NM — San Juan County, population 4,170
- Flat & Low-Slope Roofing in Kirtland, NM — San Juan County, population 585
Start on the Farmington Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Farmington Chooses Farmington Roof Pros
- ✓We quote the curbs, stacks and flues as their own line items, so you can see what the leak actually costs before deciding on the field.
- ✓Deck photographs go to you during the tear-off, not into a folder. Soft sheathing gets located and shown while there is still time to look at it.
- ✓Our inspection calendar runs late March and early October, matched to evaporative cooler startup and drain-down, because that is when a Farmington roof gets wet.
- ✓We refuse contingency agreements. You get a written price for the repair whether or not an insurer ever pays a dollar toward it.
The standards behind flat & low-slope roofing
Quality here is not a matter of opinion — it is written down. The flat & low-slope roofing work we do in Farmington follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every flat & low-slope roofing project in Farmington gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free flat & low-slope roofing free estimate in Farmington, or request a quote and we'll get right back to you.